WatchMon toolkit (Release 1.0.29 - firmware 1.41)

Published on 2 October 2017 the software install can be downloaded here.

 

New Features

  • WiFi connectivity
    • allow remote configuration of setup parameters
    • limited mode to avoid broadcasting continuously on network
    • broadcast mode with disabled RX mode (secure)
    • traffic statistics to help debugging
  • Quick Session history provide the ability to 
    • sliding time window of 17 hour (1 min) and 3.5 days (5 min)
    • default 1 min, with interval options of 30 sec, 1 min, 2 min and 5 min
    • method to collect all internal records and store to file
  • Commissioning Checklist on startup to ensure setup steps are completed.

 

Enhancements

  • USB connectivity 
    • auto scan or defined com port reference
    • multiple systems from one computer
  • when joining Wireless AP can manually add SSID
  • add statistics for failed authentication events
  • enable auto refresh for shunt metrics/register dialogue screens
  • connectivity to new shunt device for ShuntMon2
  • software updates prevent warns with pre-release versions
  • ability to add customer banner for toolkit 
  • Daily session history to skip blanks from file append and display

 

Fixes

  • Daily session history
    • resolve bug with extractor via USB (1.0.28)
    • expanded to meet 10 year capacity
  • reset lifetime metrics now also clears shunt metrics
  • properly fetch the charging control parameters for SoC% via wifi
  • time sync attempt if out by more than 2 seconds, checked every 15 minutes 

 

Reference

Previous release (software 1.0.28 - firmware 1.40)

Next release (software 1.0.30 - firmware 1.42)

How to install the WatchMon Toolkit software

How to upgrade the Watchmon firmware

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk