WatchMon toolkit (Release 1.0.17 - firmware 1.29)

Published on 8 September 2016 the software install can be downloaded here.


New Features

  • Backup setup, add file backup of device setup to my documents.
  • NeoPixel display, add external Soc% indicator for 8 segment addressable LED.



  • Software Installer now adopts signed company certificate for app and installer.
  • Add Bypass thermal relief function for charging.
  • Display power rate state/calc for charging / discharging
  • Add manual limited power mode for charging/discharge.
  • Revise native canbus charge/discharge status message flags.
  • Revise control VoltView screen to show both normal and limited power remote targets
  • Add sounds when saving/error to hardware/control setup screens



  • When monitoring RunIdle/Charge input take immediate effect if disabled.
  • When bypass achieves completion stop charging session.
  • Ensure that SoC% modifications refresh state from device. 
  • Revise control logic for charging/discharge to ensure transition times for Norm/Limp/Off.



Prior release notes

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk