How to connect to WatchMon via WiFi access point


Steps to remotely connect to the BMS via wifi router / access point. Caution the system will only be in display mode to ensure a safe connection. To make changes to the system will require the technician connect via USB.


Step 1 - Navigate to system connection selector and click


Step 2 - Navigate to Network tab 


Step 3 - Select SystemID from available option (either click or enter number)


Step 4 - Close connection dialogue once system is connected and Active


Step 5 - Normal responding screens



If there is a software/ firmware mismatch the following will be displayed. There is a firmware upgrade process documented below.



Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk